BSI Plastic-Cure 1/2oz with brush applicator

BSI 105 Plastic Model Glue 0.5oz  Odorless Brush on  glue for Plastic Models 1/2 oz Bonds all plastics, wood and foam Directions:  Brush on Plastic Cure to one surface of the parts being joined, then hold parts tight together for 10-20 seconds.  Plastic Cure won't frost clear plastic and works on foam, Insta-Set Accelerator must be used when bonding two pieces of foam together.  Full strength is reached in 3 hours.  Excess cured adhesive can be removed by rubbing the area with a paper towel soaked in Un-Cure.  Refrigerate to extend shelf life. Warning: Eye and skin irritant.  Bonds skin in seconds.  Contains cyanoacrylate ester.  If eye contact occurs, flush with water only and get medical attention.  If skin bonding occurs, peal, don't pull: soak in Un-Cure or acetone if necessary.  Use with adequate ventilation.  Keep out of reach of children. Made in the USA